Magicard Prima 4 upgrade for Prima 8 ribbons

The firmware to update Prima 4 to Prima 8 printers is here:

https://techs.magicard.com/prima4/prima4_to_prima8/

There’s two zip files, one for 600DPI and 300DPI variants.

Save this locally and extract the files, there’s three.

Each file needs to uploaded into the printer with it “Download Mode”

I’m not sure if you’ve upgraded the firmware on any Prima before so here’s some instructions.

Once the update is completed printer will only operate with ribbon P/N’s Prima8xx

It’s also a one-way ticket (no possibility to reverse).