How to Calibrate a Ribbon Sensor on an Evolis Pebble 4

Modified on Mon, 22 Nov 2021 at 11:07 AM


If your Evolis Pebble 4 ID card printer is not printing correctly you will need to calibrate the ribbon sensors on your Primacy printer.

Please Note: The Pebble 4 has been discontinued by the manufacturer. 

Please note, a YMCKO ribbon must be installed to run the calibration.

To Calibrate your Printer

  1. Go to your devices and printer folder.
  2. Right click on the Pebble 4 and choose hoose printing preferences.
  3. Click on the Tools tab, then click Dialog with Printer.
  4. Type the command Sa;c (must be exact). Click enter on your keyboard to send the command.

The printer will then check the color sensor. The answer should be OK.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article