Testing the HID Omnikey 5122 dual (contact / contactless) encoder

Modified on Wed, 31 Aug 2022 at 04:12 PM

While we're on the subject, I have another one for the HID Omnikey 5122 (below) ?

 

Testing the HID Omnikey 5122 dual (contact / contactless) encoder;

 

Work backwards from the printer.

 

Step 1;

 

Does the PC see the encoder(s)?  (Yes / No)

From Control Panel -> Device Manager expand the Smart card readers entry;

image.png

 

Assuming Yes, and it’s an HID Omnikey 51xx dual encoder that is fitted;


Step 2;

Download and install HID’s Omnikey Workbench.

The latest version is V2.2 and can be downloaded from here;

 

https://www.hidglobal.com/drivers/37339

 

Does that see the encoder(s)?

 

image.png

 

 

Assuming the encoders are listed in the Omnikey Workbench;

 

Step 3;

 

Select the contactless encoder (for contact chip encoding, choose the top encoder, without CL);

 

image.png

 

 

Load the Mifare card into the contactless encoding position here;

 

Printer Properties -> Encoding;

image.png

 

 

Look on the HID Omnikey Workbench.
 Does it see the card?

 

image.png


Is there an answer to reset (ATR)? 

image.png

 

 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article