Evolis Quantum 2 - Magnetic Encoding Issues

Modified on Wed, 4 Jan, 2023 at 11:56 AM

If your Evolis Quantum 2 ID card printer is not encoding correctly you will need to calibrate the encoder sensors on your printer.

Please note, a YMCKO ribbon must be installed to run the calibration.

To Calibrate your Printer

Go to your devices and printer folder.
Right click on the Pebble 4 and choose hoose printing preferences.
Click on the Tools tab, then click Dialog with Printer.
Type the command Sa;c (must be exact). Click enter on your keyboard to send the command.

The printer will then check the color sensor. The answer should be OK.