How to Adjust Printhead Power - KPower of a SD260/SD360

Modified on Fri, 17 Feb, 2023 at 2:54 PM

  1. Go to your Devices and Printers folder, right-click on the XPS Card Printer, and choose Printer Properties.

    SD160 Printhead Power 1

  2. Select the Printer Status tab, then click on Configure Printer to bring up the Printer Manager web interface.

    SD160 Printhead Power 2

  3. Choose Web Admin from the drop-down menu, then click Log In.

    SD160 Printhead Power 3

  4. Click on the Printer Setting drop-down menu, then Select Print.

    SD160 Printhead Power 4
  5. Scroll down to KPower. Increasing the value darkens the image while decreasing the value will lighten the image. It is recommended that you change the value in increments of 10, test print a card, and then change again if needed. A good point to start with the KPower is to set it to 15 first.



  1. Once you have adjusted the value, click Set Current to save the settings.

SD160 Printhead Power 6

 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article