If you are getting white margins while printing to the Magicard Ultima printer you need to adjust the card design template.
Please try the following..
- Open the card design you are having an issue with
- Click the menu button (3 lines top left ) and select 'Card Setup'
- Change the 'Print left' and 'print top' offsets to 1.5 as per below.
- Print a card to check positioning, Adjust further if required.
Alternatively use this same menu to change the design area to same as the Ultima print area which is 87.7 x 56.1mm (CR80 card + bleed) then adjust the layout so the artwork meets the edge of the design area and the artwork included bleed.