HDP5000 Improve network performance with Half duplex setting

Modified on Sat, 10 Apr, 2021 at 12:54 PM

When printing via a network connection the HDP5000 printer takes a long time to start printing after the print job has been sent to the printer. This is frequently noticeable when printing a PDF file.
Usually the time it takes for the printer to start printing can be reduced significantly by changing the communication mode to Half Duplex

To set the HDP5000 printer�s network communication to half duplex requires that Telnet be enabled on your PC.

The following steps show how to use Telnet to set the printer�s network communication to Half Duplex. 

These steps were copied from a Windows XP system. 

If you are using Vista or Windows 7 or Windows 10, your screen may look different, but the steps are similar.
Click the Windows key + R to open the Run Windows and type CMD for open the comand prompt

In the command prompt window, type Telnet followed by the IP address of your printer.

For the login user type root (case sensitive)

The default password is idcard (case sensitive) then hit Enter key on the keyboard.

Next, type store ifc mode 10half and then Enter

Telnet should return ok indicating that the change has been made.
Type quit then Enter at the prompt to exit Telnet.. Reboot the printer.

The change can be verified on the LCD screen of the printer. 

Select Options � Network Settings to view the network configuration information data.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article