Dieser Artikel ist auf German nicht verfügbar. Sehen Sie ihn sich auf English an
If you are seeing ribbon calibration sync issues which manifest as large blocks or Yellow or Green in the print check the 'Red/Green/Blue on White Panel' after calibration
1. If one of them is under 1,000, please replace the Color Out Sensor.
2. If all of them are under 1000, please replace the Color In Sensor. (Sometimes the color out sensor is the cause when it doesn't turn on.)
You can check these values with CardPrinterDiagnostic.exee included on the installation CD/Download.
hp?bo_table=s4_1Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article