Check list for Smart 50L lamination issues

Modified on Mon, 06 Apr 2020 at 02:45 PM

The SMART-50 Laminator check list for correct fconfiguration

1. Heater Temperature (Old head: 150'c, New head: 160'c)

2. Laminating with pulse (8000 default.. or more)

3. Lami start card Pos. (5 default.. adjust it)

If the attached position is not abnormal, please check no.3.

If it still occurs, check the card is slipped.

 1. Clean the rollers

 2. Idle tension roller is old or not. The new one has a groove in the center. (See the attached picture.)

 3. Flim In/Out sensor : If it is out of order, it occurs

 4. Lami. Ribbon motor: if it is weak, it occurs

Please check one by one.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article